Processing... Please wait...

Product was successfully added to your shopping cart.

BUY 2 SUPs AND SAVE $100 - Details
  • Monster Paint Traction

Monster Paint Spray On Clear Traction For Stand Up Boards

Be the first to review this product

Availability: In-stock

  • Details

    Monster Paint Clear Spray-On Traction for Stand Up Paddle Boards is Ultra-Lite, Super Clear and provides Nose Riding Grip. It is Spray-On SUP Traction that gives you the grip and the looks you are looking for.

    Surface Coverage: 1 spray can will coat 2 Boards and 2 Paddles

    “With a shiny, brand new SUP Board and stylish deck pad on the back half where I paddle from…..what about when I’m riding a wave and need to run up to the nose? Wax…..that gets dirty and all over everything else? NO WAY, I recommend a Spray can of Clear Monster Paint, the non-slip clear texture coating that brilliantly shows the manufactures label, Hawaiian prints, Airbrush colors, pin line and even any stick-on logos and don’t worry about slipping off ever again.” ~Aloha Gerry Lopez


    *Where can I use Monster Paint Traction?

    Use Monster Paint Traction for "Nose Riding" on Longboards, SUP Board and the Paddle Shaft for "Hand Grip". For Sailboard, Kiteboard, Wakesurfing, Towboard, Skimboard and Skateboards. Use on Shortboards as a wax base coat for killer wax bumps and "Hand Grip" for unreal big air tricks.

    *How many boards will 1 Spray Can of Monster Paint Traction cover?

    Surface coverage (using 3 coats each) is 3 Boards or 2 boards and 2 paddles.

    *What surfaces can I apply Monster Paint Traction?

    Epoxy, Fiberglass, Gloss Coat and Sand Finish, Gelcoat, Wood, Carbon Fiber, Aluminum, and most other surfaces.

    *How do I apply Monster Paint Traction?

    Clean surface of all dirt, wax, oil, etc. Spray from a distance of 18" inches using smooth even strokes. Apply 3 lite coats to build up the clear texture for long lasting traction. For more details see directions on back of the can or download “Chuck's Application Tips” below.

    *How do I clean the surface area prior to appling Monster Paint Traction?

    Prep the surface using a Surf Wax Remover or lacquer thinner, and paper towels. All wax, oil, and dirt must be removed to insure proper adhesion.

    *What is the minimum temperature I can apply Monster Paint Traction?

    Apply when the temperature is 50*F (12*C) minimum, 90*F (32*C) maximum.

    *How long does it take to dry?

    Dry to the touch in 1 hour. Hard Cure time @ 77*F is 18 hours, Overnight cure is recommended.

    *Can Monster Paint Traction be used as a Wax Base Coat?

    For Longboards and Shortboards use as a base coat for killer wax bumps and "Hand Grip" for unreal big air tricks.

    *What’s the best way to keep Monster Paint Traction clean?

    Clean Monster Paint Traction with dish soap and water. Scrub with a kitchen brush and rinse soap off thoroughly with clean water.

    *What can I do to remove Surf Wax from Monster Paint Traction?

    Use a citrus based Surf Wax Remover. It will remove the wax but not the Monster Paint Traction.

    *How long will Monster Paint Traction last?

    A 3-coat appliction cleaned and applied properly, allowed 18 hours or more cure time will last for 8 months or more before a touch-up coat is needed.

    *How can I remove Monster Paint Traction competely from my board?

    To remove Monster Paint Traction from the surface of your boards deck or paddle shaft use a Lacquer Thinner, or fine sand paper.

    *What kind of guarantee does Monster Paint Traction have?

    Monster Paint Traction comes with a 30-day money back guarantee.

    Additional Information
    Manufacturer No
    Features No
    Stock Availability N/A
    Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.

    0 Review(s) for "Monster Paint Spray On Clear Traction For Stand Up Boards"